An Introduction of More Information of Ferrule Type Air Quick Coupler

What are the installation standards for ferrule Air Quick Coupler:

① The pre-installation force should not be too large. There are mainly ferrule type longitudinal pipe joints, ferrule end longitudinal through connectors, ferrule type three-way pipe joints and other types.
T

What are the installation standards for ferrule Air Quick Coupler:

① The pre-installation force should not be too large. There are mainly ferrule type longitudinal pipe joints, ferrule end longitudinal through connectors, ferrule type three-way pipe joints and other types.
The exact method should be what kind of joint body is used to connect one end of the pipe, and the corresponding connection end is pre-assembled with the same type of joint, so as to avoid leakage problems to the greatest extent. The detailed method is to use a joint body as the mother body, and press the nut and the ferrule onto the pipe. Joints with small pipe diameters can be pre-assembled at the length of the vise. If the ferrule is severely deformed during pre-installation, the sealing effect will be lost. After the pipe is sawn, it should be smoothed on a grinding wheel and other tools, and the burrs should be removed, cleaned and blown with high-pressure air before use. A special pre-installed device is generally required.

② The end of the pipe should be flush. The author found that even if it is a unified batch of goods from a unified manufacturer, the depth of the tapered holes on the joint bodies of these types of joints is often different, resulting in leakage, and this problem is often overlooked. The inner blade of the ferrule should fit exactly into the outer wall of the pipe, and the ferrule should not be significantly deformed.

③When pre-installing, try to maintain the coaxiality between the pipe and the joint body. If the pipe deflection is too large, it will cause the seal to fail.

④The pre-assembly of the card sleeve pipe joint is the most important link, which directly affects the reliability of the seal. The tightening force of φ6-10mm ferrule is 64-115N, φ16mmr 259N, and φ18mm is 450N. When the pipeline is connected, it is assembled according to the specified tightening force.

(2) When connecting the pipeline, it should be tightened at one time to avoid multiple disassembly, otherwise the sealing function will be deteriorated.

(3) When connecting the pipes, the pipes should have enough deformation margin to avoid tensile stress on the pipes.

(4) It is forbidden to add fillers such as sealant.

(5) When connecting pipelines, avoid lateral force. Excessive lateral force may cause loose sealing. In order to achieve a better sealing effect, some people apply sealant on the ferrule. As a result, the sealant is flushed into the hydraulic system, causing failures such as blockage of the orifice of the hydraulic component.

Features of card sleeve pipe joints:

The card sleeve type pipe joint has the advantages of simple structure, convenient use and no need for welding. The author summed up some experience through many years of practice and achieved good results. However, in the medium and high pressure hydraulic system, improper operation will often cause leakage and affect its popularization. The best choice for steel pipe is stress-relieving annealing 20# fine drawn pipe, which will help the inner blade of the ferrule to be embedded into the outer surface of the steel pipe and play a reliable sealing role.

If you want to purchase Air Duster Gun, welcome to contact us!


snipsnip

32 Blog posts

Comments