Importance of Tyres and Basic Car Maintenance

Nowadays, with the facility of Mobile Tyre Fitting Port Talbot, it is much easier to have your tyres mounted correctly.

The side mirrors, seatbelts, and airbags are probably the first things that come to mind when you think of a car's safety features. While these three are undoubtedly crucial, many car owners ignore another vital component: the tyres. Tyres are crucial in ensuring that your automobile is safe to drive because they are the only point of contact between you and the road. Many times, car owners are completely unaware of the state of their tyres. Here are a few tips that a vehicle owner should keep in mind to ensure the long life of their tyres.

Proper Mounting of Tyres

One should never attempt to place tyres on rims on their own, unlike changing a wheel. It is preferable to have the tyres changed by professionals using a specific tyre changing machine. Nowadays, with the facility of Mobile Tyre Fitting Port Talbot, it is much easier to have your tyres mounted correctly. All one has to do is order their required tyres and get them mounted on their vehicles by an expert according to their preferred time and location.

Surfaces That Are Stony or Rough Should Be Avoided

Sharp stones and abrasive surfaces like gravel, as well as uneven and fractured roads, increase tyre wear. Punctures and sidewall rips are common on such uneven surfaces. So, if you can, avoid such surfaces as much as possible. But if you have no choice, then you should drive with utmost care and precaution.

Reduce Your Speed on Concrete Roads

High speeds on concrete highways lead to rapid tyre wear. The cement surfaces cause the tyres to heat up quickly, resulting in many blowouts. If one looks attentively, one will notice that highways are strewn with burst tyres and are known for tyre related problems. So, when driving on concrete expressways, the best option is to slow down and stick to the speed limit. Taking regular rests in the summer can also help tyres cool down, extending their life and reducing the likelihood of a blowout.

Rotation of Tyres on A Regular Basis

Rotating your tyres every few months is the greatest method to get the most out of them. Back tyres need to be replaced more frequently than front tyres. Before you go out and buy a new set, rotate the existing front tyres to the back and buy a new pair for the front. Also, keep any removed tyres that are in decent enough condition to be used sometimes as spares. Rotation of tyres is very important because if it is ignored, then it may result in uneven wearing of one or more tyres.

Lug Nuts Should Be Oiled

Maintain adequate lubrication of the sockets and nuts that keep your rims in place. They will loosen if you use too much, but if you use too little, they will be difficult to remove.

One Should Ensure Moisture Free Compressor Air Valve

Unwanted water might occasionally get into the air compression tank you use to inflate your tyres. Check the valve before putting the nozzle on it. It's simple: simply press your thumb against the compressor's nozzle, and if your thumb gets wet, don't use that nozzle to fill your Tyres Port Talbot. Excess water in the air tank will directly enter your tyre, potentially causing several issues. Water in your tyres can cause the rim to corrode from the inside out, resulting in a wheel imbalance while you're driving.

Allie Kieffer

1 Blog posts